STATOR HOLDING RING ROTATING MODEL SHRR/IV
The stator holding ring is designed and manufactured for holding large frames. The base of the ring can be rotated on a table which is provided with a lifting device so that even the heaviest frames can be rotated above their own axis . The ring which can be rotated 360 Deg. is mounted in Ball bearings and can be held in desired position with the help of two clamps. This helps a single operator to manipulate the stator in their frames .No outside help is required. It may be noted that large sized frames are required to be held in required position for inserting and tieing down preformed coils.


TECHNICAL SPECIFICATION :
MODEL SHRR/I SHRR/II SHRR/III SHRR/IV
Rotation Hand Hand Hand Hand
Inside Dia. (mm) 700 1000 1400 1800
Equip Wt (Kg) 160 200 275 400
(Electrically operated STATOR ROTATORS for large diameter are also offered on request . )


Request a Quote  ]

CIRCULAR SAW
Circular Saw Accurately Cuts laminates of Glass epoxy, Bakelite, Cloth fibre used for Motor/Generator Wedge. Before Beveling wedge, strip of different width has to be cut. This machine Cuts strips of different width as set on Strip Guide Bar.
Ball bearing fitted motorised circular Saw machine having table has a rise and fall movement adjustment between 10-75 mm. Table can be titled upto 45 degrees. Saw table running in double row bearings , equipped with Saw guard , rip fence and material guide plate.

OPTIONAL ATTACHMENT AND ACCESSORIES :

  1. H.S.S. Saw (12 O.D.) only for wood
  2. Diamond Saw (8 O.D.) for glass epoxy, cloth fibre sheet.
  3. Vacuum Dust Collector
TECHNICAL SPECIFICATION :
Particulars Parameters
Cutting Thickness (Max) 25 mm
Motor 1 HP
Operating voltage 415 volt , 3 phase, 50 Hz.  

Request a Quote  ]
 

WEDGE BEVELER
MODEL WB/5

Wedge Beveler accurately bevels wedges of any size and of special shapes , quickly savings its cost by preventing delays.
Beveling cutters are used singly or in pairs. Each cutter is ground to 30,40 or 60 Deg to provided included angles of 60 , 90 or 120 Deg.

TECHNICAL SPECIFICATION

Particulars Parameters
Wedge Length Max - 250 mm
Wedge Width Max - 40 mm
Wedge Height Max - 8 mm
Motor - 1 HP
Operating voltage 415 volt , 3 phase , 50 Hz

Request a Quote  ]



INDUSTRIAL WASHING MACHINE
The Industrial Washing Machines have been developed to provide fast , efficient and economical cleaning of old and new manufactured components which are contaminated with loose burr, carbon , grease ,oil, soil, dust, Polishing residue etc.
Components are loaded from top into an easily removable stainless steel wire Mesh basket which is rotated by a variable speed DC Geared Motor. The water Spray bars deliver high pressure spray of heated water and detergent on components for cleaning.

MODEL : IWM/S

Particulars Parameters
Job Dimension (Max) : Dia 800 mm, Height 500mm
Job weight (Max) : 150 Kgs
Heater : 6 KW
Max. temperature : 90 Deg.C
Basket Drive (DC) : 0.180 KW
Power supply : 415 V, 3 Ph, 50 Hz 4 wire

Request a Quote  ]
 

<< Previous

Next >>